Each part on a humanoid has a different job: soft where it meets people, stiff where it carries load, cosmetic where customers see it. We pick the technology and material per part, not per program.
1
Head Shells, Face Plates & Visors
The head carries the robot's identity and its most sensitive sensors. We print head shells, face plates, camera and lidar windows, and expressive features, including multi-material animatronic eyes.
- Process SLA, Color PolyJet, MJF
- Material Clear and high-detail resins; VeroUltra + Agilus30; PA12
- Finish Polish, paint, vapor smoothing
2
Body Shells & Exterior Panels
Torso, shoulder, thigh, and shin covers that look molded without waiting on a mold. Shells up to 340 x 340 x 600 mm print in one piece, with snap fits, bosses, and sensor cutouts built in.
- Process MJF, SLS; SLA / PolyJet for show models
- Material PA12 nylon
- Finish Powerfuse S vapor smoothing, DM60 deep dye
3
Soft Robot Skins & Pinch-Point Covers
Humanoids work beside people, so contact surfaces need to give. Lattice skins tune softness zone by zone: compliant over joints and pinch points, firmer where the robot carries or pushes. Skins can carry channels for tactile sensors and wiring.
- Process SLS; PolyJet for durometer prototypes
- Material EOS TPU 1301 lattice; Agilus30
- Finish Vapor smoothing, deep dye
4
Hands, Fingers & Gripper Pads
Finger links, palm structures, tendon guides, and soft fingertip pads for grip and compliance. Rigid-flex prototypes in a single PolyJet print let teams test feel before committing to production materials.
- Process PolyJet, SLS, MJF
- Material VeroUltra + Agilus30; TPU 1301 pads; PA12 links
- Finish As-printed, vapor smoothing
5
Joint Bellows, Boots & Seals
Flexible accordion covers keep dust, debris, and fingers out of knees, elbows, wrists, and the waist without restricting range of motion. Wall thickness and pleat geometry are tuned to each joint's travel.
- Process SLS
- Material TPU 1301
- Finish Vapor smoothing for sealed, cleanable surfaces
6
Custom Humanoid Robot Footwear
Feet take every step and every fall. We produce humanoid robot footwear components, including SLS PA12 midsoles and outsoles, with rigid sole plates for force-sensor mounting and TPU 1301 lattice for cushioning and traction.
- Process SLS
- Material PA12; TPU 1301 lattice
- Finish Vapor smoothing, deep dye
7
Soft & Airless Wheels
Wheeled-base humanoids and mobile manipulators need wheels that roll quietly, grip polished floors, and never go flat. Lattice and spoke tires set compliance and rolling feel by geometry, mounted on rigid printed hubs.
- Process SLS (tire); MJF / SLS / CFF (hub)
- Material TPU 1301; PA12; carbon fiber reinforced
- Finish Deep dye, vapor smoothing
8
Actuator, Sensor & Electronics Housings
Motor and gearbox covers, encoder housings, camera and IMU mounts, and compute enclosures with integrated bosses, cable exits, and mounting features: one printed part replacing several machined ones.
- Process MJF, SLS, CFF, SLA
- Material PA12; continuous carbon fiber composite
- Finish Vapor smoothing, deep dye
9
Cable & Harness Management
Harness guides, clips, strain reliefs, and routing channels that follow the robot's real geometry through rotating joints. Flexible TPU strain reliefs protect cables where they flex thousands of times a day.
- Process MJF, SLS
- Material PA12; TPU 1301
- Finish As-printed, deep dye
10
Cooling Ducts & Airflow Parts
Compute modules and battery packs packed inside a torso need airflow. Printed ducts, shrouds, and vents snake through tight packaging that sheet metal and molded parts can't reach.
- Process MJF, SLS
- Material PA12
- Finish Vapor smoothing for smooth interior flow
11
Fall & Impact Protection
Bipedal robots fall during development, and sometimes in the field. Energy-absorbing lattice pads on hips, shoulders, knees, and the back protect expensive hardware and the people nearby, without the bulk of foam.
- Process SLS
- Material TPU 1301 lattice
- Finish Deep dye, vapor smoothing
12
Brackets, Assembly Fixtures & Test Tooling
Stiff internal brackets and mounts, plus the jigs, nests, calibration fixtures, and end-of-line test rigs your line needs to build robots consistently.
- Process CFF, FDM, MJF
- Material Continuous carbon fiber composite; ULTEM 9085; ASA; PA12
- Finish As-printed, machined inserts