Production 3D Printing · Irvine & Orange County

Expert 3D Printing Production in Irvine, CA

Repeatable, finished, production-grade parts for Irvine engineering teams, built in-house at our ISO 9001:2015 certified, ITAR registered facility in Cypress, California.

Where can I get production 3D printing in Irvine? SNL Creative provides production 3D printing to Irvine companies from its Cypress, CA facility in Orange County. We run SLS, MJF, SLA, Color PolyJet, FDM and continuous fiber printing in-house, finish parts with DyeMansion, and operate under an ISO 9001:2015 certified quality system, so batches arrive consistent, finished and ready to ship or install. Same-day pickup is available for Irvine customers.

Get an Instant Quote Talk to an Engineer Call (714) 420-8957

ISO 9001:2015 Certified
ITAR Registered
Operating Since 2008
Same-Day Pickup for Irvine
In-House DyeMansion Finishing

Production 3D Printing for Irvine: At a Glance

The short version for Irvine engineers, buyers and program managers comparing suppliers.

Provider: SNL Creative, an additive and contract manufacturing studio operating since 2008
Facility: 11235 Knott Ave, Suite A, Cypress, CA 90630 (Orange County)
Serves Irvine via: Same-day pickup, local drop-off coordination, and nationwide shipping
Production processes: SLS, MJF, SLA, Color PolyJet, FDM and continuous fiber (CFF)
Materials in production: PA12 (SLS and MJF), TPU 1301 (SLS), Nylon 12CF (SLS), plus resins, PolyJet photopolymers and FDM thermoplastics
Finishing: DyeMansion Powerfuse S vapor smoothing and DeepDye coloring, paint, assembly and production finishing
Quality & compliance: ISO 9001:2015 certified; ITAR registered
Best fit for: Batch production, bridge production before injection molding, repeat orders, end-use parts and finished-looking components
Start here: Instant quote, contact our team, or call 714-420-8957

Why Irvine Teams Move From Prototyping to Production 3D Printing

Irvine is packed with product companies in medical devices, consumer electronics, automotive and mobility, and aerospace suppliers, many of them running lean teams on tight launch calendars. Production 3D printing fits that reality: you get real parts in real quantities without committing to tooling before the design has settled.

Consistency

Batch-to-batch repeatability

Production work is about the tenth part matching the first. We run controlled builds, document the process, and repeat it on reorders.

Speed to market

Ship before the tooling is cut

Launch with printed parts, collect real field feedback, and update the file at no tooling cost. Move to molding only when the design and demand justify it.

One partner

Print, finish and inspect under one roof

Printing, DyeMansion finishing, assembly and quality control are all in-house, so there are no vendor handoffs between your file and your finished part.

Prototype Printing vs. Production 3D Printing

They use the same machines but demand different disciplines. This is what changes when a part goes into production.

Factor	Prototype Printing	Production 3D Printing
Goal	Learn something about the design	Deliver parts that ship in a product or program
Repeatability	Nice to have	Required; builds are planned, controlled and repeated
Process control	Informal	Documented process within an ISO 9001:2015 quality system
Design	Whatever prints	Optimized for the process: orientation, nesting, wall thickness, tolerances
Finish	As printed	DyeMansion smoothing and color, paint or assembly as the spec requires
Inspection	Visual check	First-article review and inspection against your drawing or acceptance criteria
Ordering	One-off	Scheduled batches and repeat orders against a locked process

The Production Processes We Run In-House

We choose the process that fits the part's job, then lock it so every batch matches.

SLS · EOS P396

Selective Laser Sintering

Our primary production process: durable, support-free nylon in PA12, flexible TPU 1301, and carbon-filled Nylon 12CF for stiffer parts.

Best for: housings, shields, handles, flexible and lattice parts.

MJF

Multi Jet Fusion

Production-oriented PA12 with consistent mechanical properties and fine detail across large batches.

Best for: batch runs of functional nylon parts.

CFF · Markforged

Continuous Fiber Fabrication

Carbon fiber reinforcement through the part for strength-to-weight well beyond standard printed plastics.

Best for: brackets, tooling and lightweight structural parts.

FDM · Stratasys Fortus 450mc

Fused Deposition Modeling

Production thermoplastics for larger, tougher parts where dimensional stability matters.

Best for: fixtures, jigs and large functional parts.

SLA · Stratasys Neo 450

Stereolithography

Smooth, high-detail resin parts that take paint and finishing beautifully.

Best for: appearance parts, masters and low-volume cosmetic components.

Color PolyJet · Stratasys J750

Full-Color, Multi-Material

Photoreal color and rigid-to-rubber-like materials in one build.

Best for: realistic parts, props and multi-material components.

How We Run a Production 3D Printing Job

Seven steps from file to repeatable delivery, all managed from Cypress.

Production readiness reviewWe review your CAD for the chosen process: orientation, wall thickness, feature size, tolerances and fit with mating parts.
Process and material lockWe select the technology and material that suit the part's job and lock them in, so future batches match the first.
First articleA first run lets you check fit, finish and function against your requirements before a full batch.
Batch planning and buildParts are nested and scheduled on our in-house machines, with build records kept inside our ISO 9001:2015 quality system.
FinishingDyeMansion vapor smoothing and DeepDye coloring, plus paint, assembly and production finishing as specified.
InspectionParts are inspected against your drawing or acceptance criteria, with ITAR registration supporting controlled programs.
Delivery and repeat ordersPickup in Cypress, Irvine drop-off coordination, or nationwide shipping, with reorders run against the same locked process.

Industries We Support Around Irvine

From medical device developers to EV and consumer product teams, we build production parts for the industries that define Orange County's engineering economy.

Medical Devices

Enclosures, fixtures, housings and form-and-fit parts for device development and low-volume production, built inside a documented quality system.

Automotive & EV

Functional vehicle subsystem parts and bridge production. Our leadership ran an EV additive manufacturing lab supporting full vehicle programs.

Aerospace, Defense, Drones & Robotics

Brackets, housings, end-of-arm tooling and structural parts, supported by ISO 9001:2015 certification and ITAR registration.

Consumer Goods, Sporting Goods & Fashion

Finished, product-grade components with DyeMansion color and surface quality that look like retail products, not prototypes.

Selected Production Work

Parts that shipped as real products, not just prototypes.

Sporting goods · SLS PA2200

Wilson Airless Basketball

Produced in SLS PA2200 and finished with DyeMansion for a consumer product that had to look and perform like a retail ball.

Sporting goods · SLS TPU 1301

COA Fishing Rod Handles

Flexible, durable grips produced in SLS TPU 1301, a material we specialize in through our EOS Digital Foam Network membership.

Mobility · SLS PA12

Motocutz eBike Shield

Production eBike shield printed in SLS PA12, built for real-world use and repeat orders.

Entertainment · SLS Nylon 12CF

Lightstorm Entertainment Film Components

Film components produced in carbon-filled Nylon 12CF on SLS for strength and stiffness at low weight.

Production 3D Printing as a Bridge to Injection Molding

Many Irvine product teams use printed production as the bridge between prototype and tooled manufacturing. You launch with printed parts, validate the design and demand in the market, and commit to hard tooling only when you are confident the part is final.

Printing keeps making sense while volumes are modest, designs are still evolving, or geometry is complex enough that tooling would be expensive. When volumes and design stability justify it, we can support the transition through production tooling so the move to molding does not reset your supply chain.

Serving Irvine From Cypress, CA

Our Orange County facility keeps in-person consults and part pickup practical for Irvine teams. If you would rather not travel, everything quotes online and ships.

Same-Day Pickup

Irvine customers can pick parts up the same day they are finished. Ask when you quote and we will confirm timing for your job.

Shipping & Remote Projects

Upload, approve and receive finished parts without a site visit. Many Orange County customers work with us entirely online.

We regularly serve Irvine, Newport Beach, Costa Mesa, Tustin, Santa Ana, Anaheim and Long Beach, along with the rest of Orange County and Los Angeles County.

The Team Behind Our Production Work

SNL Creative has been operating since 2008. Founder and COO Shawn Zindroski has spent his career in industrial additive manufacturing: he ran the additive manufacturing lab at Faraday Future supporting the FF91, FF Zero 1 and LeSee programs, including hands-on vehicle subsystem builds and mechanical and electrical integration, and later held business and general management roles at metal additive companies AddUp and Amaero International before leading operations at SNL Creative.

We approach every production job the way a program engineer would: fit, function, finish, schedule and repeatability, not just whether a file will print.

Production 3D Printing in Irvine: Frequently Asked Questions

What is production 3D printing?

Production 3D printing is the use of additive manufacturing to make end-use parts in controlled, repeatable batches rather than one-off prototypes. It involves process selection, a locked material and build setup, finishing, and inspection so each batch matches the last.

Where can I find expert 3D printing production in Irvine?

SNL Creative provides production 3D printing to Irvine companies from its facility at 11235 Knott Ave, Suite A, Cypress, CA 90630. We offer same-day pickup for Irvine customers and ship nationwide.

What volumes does production 3D printing make sense for?

Production 3D printing is strongest for low-to-mid volumes, for designs that are still evolving, and for geometry that would be costly to tool. For higher volumes with a stable design, injection molding often takes over, and we can support that transition through production tooling.

Which materials do you use for production parts?

Our production materials include PA12 on both SLS and MJF, TPU 1301 on SLS for flexible parts, and Nylon 12CF on SLS for carbon-filled stiffness, along with resins, PolyJet photopolymers and FDM thermoplastics for specific applications.

Is SNL Creative ISO certified and ITAR registered?

Yes. SNL Creative is ISO 9001:2015 certified and ITAR registered, supporting medical, aerospace, defense and other regulated programs in Orange County.

Can you finish and color production parts?

Yes. We run DyeMansion in-house, including Powerfuse S vapor smoothing and DeepDye coloring for PA12 and TPU 1301, plus paint, assembly and production finishing, so parts arrive ready for use or sale.

Can I reorder the same part later?

Yes. Once a part's process and material are locked, reorders run against the same setup, which keeps later batches consistent with the first.

How long does production 3D printing take?

Schedule depends on process, material, quantity and finishing. Every quote includes a lead time for your specific job, and color or paint finishing adds time. Call 714-420-8957 if you have a hard deadline and we will tell you what is realistic.

How do I get a quote?

Upload your file through our instant quote tool, or contact us for production readiness review, larger programs or controlled work. You can also call 714-420-8957.

Explore our 3D printing services, production finishing services, production tooling, 3D scanning and digital sculpting.

Standards and technology referenced on this page: ISO 9001:2015, ITAR (U.S. State Department DDTC), DyeMansion, EOS, Stratasys and Markforged.

Start Your Irvine Production 3D Printing Project

Send us your file and get a quote that names the process, the material, the finish and the schedule, from a team that builds and finishes the parts itself.

Get an Instant Quote Contact Our Team

SNL Creative
11235 Knott Ave, Suite A, Cypress, CA 90630
714-420-8957

Last updated October 2026